Vigo V10 Addition Mt6580 Firmware

FILES:

FIRMWARE:Vigo V10 Plus MT6580 5.1

FLASH TOOLS:SP Flash Tool

DRIVER:MTK  Android USB Drivers.

How To Flash Vigo V10 Plus MT6580 With Sp Flash Tool:

1. Extract And Run SP flash tool.
2. Install MTK  android USB drivers.
3. Then download Firmware file/Flash file/Rom for your cry from below.
4. switch off your mobile remove the battery (if removable) reinsert the battery as well as plug the USB cable in charging socket.
5. Now open SP flash tool.exe.
6. When SP flash tool open, larn to download button in SP flash tool.
7. In download tab, click on scatter load button.
8. After locating the scatter tab, click on the download button.
9. Now connect your smart cry amongst a USB cable as well as press volume up or volume down key for easy detection (remove as well as re insert your cry battery if it is removable)
10. When flashing is completed, a green ring will look inward SP flash tool.
11. Close SP flash tool on your estimator as well as unplug phone.
12. Power on the phone and enjoy.
13. After flashing process starts, it mightiness accept upwards to 5–10 minutes. So keep patience and wait.