Haier E13 Mt6750 Android 8.0 Oreo Firmware

Haier E13 MT6750 Android 8.0 Oreo:

1. Extract And Run SP flash tool.
2. Install MTK  android USB drivers.
3. Then download Firmware file/Flash file/Rom for your telephone from below.
4. switch off your mobile remove the battery (if removable) reinsert the battery too plug the USB cable in charging socket.
5. Now open SP flash tool.exe.
6. When SP flash tool open, instruct to download button in SP flash tool.
7. In download tab, click on scatter load button.
8. After locating the scatter tab, click on the download button.
9. Now connect your smartphone amongst a USB cable too press volume up or volume down key for easy detection (remove too reinsert your telephone battery if it is removable)
10. When flashing is completed, a green ring will seem inwards SP flash tool.
11. Close SP flash tool on your calculator too unplug the phone.
12. Power on the phone and enjoy.
13. After the flashing process starts, it mightiness cause got upwards to 5–10 minutes. So keep patience and wait.

FIRMWARE:

Haier E13 MT6750 8.0 Firmware.zip

Driver:

MTK  Android USB Drivers

Flash tools:

SP Flash Tool.