Flash Alphard Bq3 Mt6580 Android 5.1

FILES:

FIRMWARE: Alphard Bq3 MT6580 5.1.zip

FLASH TOOLS: MTK  Android USB Drivers

DRIVER: SP Flash Tool

How To Flash Alphard Bq3 MT6580 Android 5.1:

1. Extract And Run SP flash tool.
2. Install MTK  android USB drivers.
3. Then download Firmware file/Flash file/Rom for your telephone from below.
4. switch off your mobile remove the battery (if removable) reinsert the battery as well as plug the USB cable in charging socket.
5. Now open SP flash tool.exe.
6. When SP flash tool open, become to download button in SP flash tool.
7. In download tab, click on scatter load button.
8. After locating the scatter tab, click on the download button.
9. Now connect your smartphone amongst a USB cable as well as press volume up or volume down key for easy detection (remove as well as reinsert your telephone battery if it is removable)
10. When flashing is completed, a green ring will look inward SP flash tool.
11. Close SP flash tool on your estimator as well as unplug the phone.
12. Power on the phone and enjoy.
13. After the flashing process starts, it powerfulness accept upwards to 5–10 minutes. So keep patience and wait.